Ashford Guarantee
Thank you for purchasing this Ashford product. In the unlikely event there is
any fault in manufacture we will replace the item. To validate our guarantee
please visit our website or write to us.
Ashford Handicrafts Limited
Factory and Showroom: 415 West Street
PO Box 474, Ashburton 7700 New Zealand
Telephone 64 3 308 9087 Facsimile 64 3 308 8664
Email: [email protected] Internet: www.ashford.co.nz
INSTRUCTIONS
Maximum Warp Length:
Approx 11 metres / 37 feet
Assembly Instructions
Apply a little glue to each hole and push the pegs in (hammer if necessary). Fix the frame together at the
four corners, using a bolt, washer and nut. Hammer bolts into place if necessary.
Attach the rubber feet with small screws into the pilot holes in the back of the rails.
Parts List
2
Rails with 5 holes
4
Bolts with nuts and washers
2
Rail with 4 holes
1
Bottle of glue
4 Rubber
feet
18
Pegs
4
Small panhead screws
WF120318V5
WARPING FRAME - Large
