It is always recommended to anchor the unit to the ground. Drill through
the four holes in the base rails of the unit using 6mm dia masonry drill to
a depth of 70mm. Screw in the anchor fixings. (These have a self cutting
thread). Additional ZHWNUT42 and ZSCREW254 have been supplied for
bolting 2 units together using the side panels.
TOOLS REQUIRED
Power driver POSI-DRIV screwdriver, 6mm dia. masonry drill and a
10mm socket or spanner.
DOUBLE ENDED BIKE SHELTER
BASE INSTRUCTIONS
Flat and firm base. Recommended: concrete, tarmac or paving flags.
Min. distance from walls/ shrubbery: 1000mm.
Min. base size (WxDxH) 1000mm x 2200mm x 50mm.
LEVELING THE UNIT
Correctly level the constructed unit using the shims (ZCOMPPLAS)
provided prior to fixing the unit to the ground. Slide the packing pieces
under the corners of the unit base as required until an equal gap has
been achieved around the door allowing for its smooth operation and
alignment.
Warning: some panels may weigh over
20Kg. Beware of manual handling
10mm
Spanner
4mm
Allen Key
18V
For maintenance instructions of this product visit www.asgardsss.co.uk
x2
SEALANT
ZSCREW32
x6
ZSILCO1
x1
ZSCREW100
x58
ZSCREW254
X12
ZCOMPPLZS02
x8
ZCOMPPLAS22-23-24
x6
2x 2mm, 2x 3mm, 2x 5mm
6mm
Dia.
Posi-Driv
Screwdriver
ZHWNUT42
x4
35190
x2
FIXING CHANNEL
42655
x2
PAR
TITION P
ANEL
47381
x1
PAR
TITION END 046849
x2
SIDE P
ANEL
42172
x1
DOOR FRAME
x1
LEFT
HANDED: 43802
OR
RIGHT
HANDED: 43801
LEFT
HANDED SHOWN
DOOR FRAME
x1
LEFT
HANDED: 43802
OR
RIGHT
HANDED: 43801
LEFT
HANDED SHOWN
SIDE P
ANEL
42172
x1
TOP
PANEL
46846
x1
TOP
STIFFENER 42397
x1
All manuals and user guides at all-guides.com