ASG ASG-CT2500 Скачать руководство пользователя страница 47 | Manualshive

Страница: 47 / 53

ASG ASG-CT2500 Скачать руководство пользователя страница 47

Page 47

Modifying features in a locked controller: Navigate to the setting or feature that needs to be modified and tap the
appropriate button or number. The controller will then prompt the user for a password to unlock the controller. Once a
password is accepted, settings can be changed on any screen. To re-lock the controller again after modifications have

been made, tap the ‘Lock’ button at the

bottom right-

hand corner of the ‘Run Tool’ screen.

Deleting User(s)/Password(s):

From the ‘Passwords’ screen, tap

the name of the user that is to be deleted, enter the

password when prompted. The screen will show that the password is now active, and create a button next to that user

called ‘Delete User’. Tap the ‘Delete User’ button to remove the user from the cont

roller.

NOTE: It is recommended that one ID and password be programmed and stored in a safe location to prevent

from accidental locking of the controller that is left unlocked.

«
...
45
46
47
48
49
...
»

Содержание ASG-CT2500






















































Отзывы:

Нет отзывов