Asentria SiteBoss 530, Руководство пользователя

Страница: 43 / 140

Asentria SiteBoss 530 User Manual
37
Specific Security Settings – RADIUS Security Settings
SiteBoss 530 - RADIUS Security Settings
A) Primary Server []
B) Primary Secret []
C) Secondary Server []
D) Secondary Secret []
E) Fallback Mode [NONE]
F) Authentication Port [1812]
G) Accounting Port [1813]
H) CHAP [OFF]
I) Timeout [3]
J) Retries [3]
Primary / Secondary Server
sets the IP Address or host name of the primary and secondary RADIUS server.
Primary / Secondary Secret
sets the secret for the primary and secondary RADIUS server. The secret is used to
authenticate RADIUS network traffic. (Max length for each is 16 chars)
Fallback Mode
toggles between NONE and USER PROFILES. If the unit gets no response from any RADIUS server
when attempting to authenticate a user, no further action is taken if this option is set to NONE. The unit falls back to
the User Profiles configuration for authentication if this is set to USER PROFILES. Default setting is NONE.
Authentication Port
sets the UDP port (1 – 65535) that the RADIUS server uses for authentication/authorization.
Default port is 1812.
Accounting Port
sets the UDP port (1 – 65535) that the RADIUS server uses for accounting traffic. Set to 0 to
disable RADIUS accounting. Default port is 1813.
CHAP
is an ON/OFF toggle to set whether the unit uses CHAP (Challenge-Handshake Authentication Protocol)
authentication when using RADIUS. ON sets authentication to CHAP. OFF sets authentication to PAP (Password
Authentication Protocol). Default setting is OFF.
Timeout
sets the number of seconds (1 – 30) the unit waits for a response from the RADIUS server. Default setting is
3.
Retries
sets the number of times (1 – 30) the unit should try a RADIUS request again after getting no valid response.
(Valid meaning a response that is verified as really coming from the RADIUS server.) Default setting is 3.
Note:
For a complete description and explanation of RADIUS security, please refer to the RADIUS Security
section in the Features chapter.
General Security Settings
SiteBoss 530 - Global Password/Security Settings Menu
A) Show Username/Password Prompt [OFF]
B) Globally Allow Access via [MTFRSs]
C) Button Tap Allows Console Access [ON]
Global Password/Security Settings set security options that are required for
every
user who attempts to log into the
S530.
Show Username / Password Prompt
is an ON/OFF toggle to set whether a prompt for logging in is displayed.
Default setting is OFF.
Globally Allow Access via
displays a menu allowing you to toggle ON or OFF access via Modem, Telnet (ports 23,
200x, 210x), FTP, and Real-Time Socket. These are abbreviated: MTFR. Default setting for all is ON.