Asentria SiteBoss 530 Скачать руководство пользователя | Manualshive

Страница: 37 / 140

background image

Asentria SiteBoss 530 User Manual

31

Modem Settings

SiteBoss 530 - Modem Settings
A) Dialup Modem
B) Wireless Modem

The Modem Settings menu displays two sub-menus for configuring either the optional internal 33.6K modem, or
an optional wireless modem expansion card.

Dialup Modem

SiteBoss 530 - Dialup Modem Settings
A) Data Format [8N1]
B) Duplex [FULL]
C) Init String [ATM1]
D) Inactivity Timeout [0]
E) Upon Modem Connect Go Directly To [LOGIN]
F) TAP Init String [ATM0]
G) TAP Uses 8N1 Data/Parity/Stop [OFF]
H) Caller ID Security [OFF]

Note:

If the optional 33.6K dialup modem is not installed in the S530, this menu is displayed, but changing

any of the settings will not do anything.

Data Format

toggles settings for word length, parity, and stop bit settings. The available options are: 8N1, 7E1,

7O1, and 7N1. Default setting is 8N1.

Duplex

controls the echo settings for the modem command processor. Full duplex causes the S530 to echo all

characters sent to the remote device. Half duplex turns off character echo. Default setting is FULL.

Init String

sets the user-defined modem initialization string. This string is sent to the modem before important

factory modem initialization settings, so certain settings in this init string may be overridden. Default setting is
ATM1. (Max length 126 chars) Note: Make sure to enter 'AT' at the beginning of this initialization string.

Inactivity Timeout

sets the number of minutes (0 – 255) to wait before disconnecting an idle modem connection.

A setting of 0 means the connection will never automatically expire. Default setting is 0.

Upon Modem Connect Go Directly To

toggles through a list of actions to control what a user sees directly after

connecting via modem. LOGIN requires the user to login with username and password, and will then take them
to a command prompt. A serial port (I/O1, I/O2, etc.) redirects a modem user directly to that serial port upon
connecting. In this passthrough mode, the command processor of the S530 is transparent. Default setting is
LOGIN.

TAP Init String

is the user-defined modem initialization string used only when the modem is making an

alphanumeric modem callout. Default setting is ATM0. (Max length 126 chars) Note: Make sure to enter 'AT' at
the beginning of this initialization string.

TAP Uses 8N1 Data / Parity / Stop

is an ON/OFF toggle, to force the TAP initialization string data/parity/stop

settings to 8N1. Default setting is OFF.

Setting Key:

modem.hsk

Values are

RTS

(default),

None

and

Xon

. RTS means that on serial pass-through, the modem uses RTS

handshaking; None means no handshaking is used; and Xon means XON/XOFF characters are used.

Caller ID Security

displays a menu that allows you to configure from one to twenty inbound phone numbers to

restrict modem access.

«
...
35
36
37
38
39
...
»

Содержание SiteBoss 530













































































































































Отзывы:

Нет отзывов

Похожие инструкции для SiteBoss 530

Бренд: Parasound Страницы: 72

Бренд: Jafar Страницы: 15

Бренд: Eaton Страницы: 16

Бренд: KELCO Страницы: 36

Бренд: Eaton Страницы: 86

Бренд: K&K Страницы: 6

Бренд: Jafar Страницы: 10

Бренд: jbc Страницы: 4

Бренд: jbc Страницы: 4

Бренд: L. G. B. Страницы: 2

Бренд: L-Acoustics Страницы: 36

Бренд: Vaillant Страницы: 11

Бренд: Balboa Страницы: 74

Бренд: Cadac Страницы: 4

Бренд: Balboa Water Group Страницы: 88

Бренд: ABB Страницы: 2

Бренд: Coris Страницы: 4

MS6-SV-...-D-10V24

Бренд: Festool Страницы: 32

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды