TD 92326GB
2009-03-10 / Ver. E
Installation and Operation Manual
VoIP Gateway
78
11.4.5 Register a New Subscriber
1
Select PBX > Objects.
2
Select “User” in the drop-down list and click “New”. A new window opens.
Figure 61. Register new subscriber
3
Configure general settings, refer to
You must complete the entries in the DECT area as described, if the subscriber is a
wireless DECT device.
4
Select/Enter the following settings on the
DECT
area:.
5
Click “OK”.
Figure 69.
Field name
Description
•Gateway
The name of the DECT system to which the DECT device is
connected. All DECT base stations will have the same
system name.
•IPEI
Optional. This field will be automatically populated when
the device subscribes to the DECT system. Alternatively, you
can enter the serial number of a specific handset (IPEI) to
restrict this assignment to only one device.
•AC (Accesscode)
Additionally an individual password can be assigned to
protect the handset from unauthorized use. It must differ
from the anonymous authentication code in the base
station. The password has to be entered when logging on
the handset. This is required when the IPEI field is populated
by the administrator.
If no password is defined here no password is required
when logging on the handset (the anonymous
authentication code in the base station will be used).
