TD 92372GB
2007-06-18/ Ver. E
Installation and Operation Manual
IP-DECT Base Station & IP-DECT Gateway
42
3
Enter a new password in the
Password
text field. Repeat the password.
4
Click "OK".
7.5.2
Configure Authentication Code
If allow anonymous subscription method is selected it is needed for the IP-DECT system to
have an authentication code configured, select a code consisting of 4 to 8 numbers (0-9).
1
Select DECT > System.
2
Enter an authentication code in the
Authentication Code
text field.
3
Click "OK".
7.5.3
Change Subscription Method
The IP-DECT system can be set to use the following subscription methods:
• With User AC
• With System AC
• Disable
Figure 42.
Select subscription method:
1
Select DECT > System.
2
Select subscription method in the
Subscriptions
drop-down list.
3
Click "OK".
7.5.4
Select Tones
1
Select DECT > System.
2
Choose tones in the
Tones
drop-down list.
3
Click "OK".
7.5.5
Set Default Language
If the handset does not send language information to the system, this setting determine
which language that is displayed for some text messages (for example hung-up and
disconnected).
1
Select DECT > System.
2
Choose language in the
Default Language
drop-down list.
3
Click "OK".
7.5.6
Set Frequency Band
The IPBS/IPBL can operate in the following frequency bands:
• 1880 - 1900 MHz, Europe, Africa, Middle East, Australia, New Zeeland and Asia
• 1910 - 1930 MHz, South America
• 1920 - 1930 MHz, North America
Figure 43.
1
Select DECT > System.
2
Select frequency area in the
Frequency
drop-down list.
3
Click "OK".
4
Reset in order to make the changes take effect, see
