Ascent AP224S, Руководство пользователя

Страница: 9 / 79

AP224S GPON HGU User Manual
Unit Installation Adjustment
Installing the HGU on a horizontal surface (bench top):
Put the HGU on a clean, flat, sturdy bench top. Keep a minimum 10 cm clearance on all sides
of the unit for heat dissipation.
Installing the HGU on a vertical surface (Hanging on a wall):
You can install the HGU on a vertical surface by using the mounting holes on the bottom of
the ONU chassis (refer to Figure 1-5) and two flat-head wood screws.
a. Insert the screws into the wall. The screw positions must be on the same horizontal line
and the distance between them must be 165 mm. Reserve at least 6 mm between the
screw caps and the wall.
b. Hang the HGU on the screws through the mounting holes.
Set up Wired Connection
Connect PC with GPON HGU Ethernet port using an RJ45 Cat 5 cable.
Set up Wireless Connection
Choose the wireless network name (SSID) “Broadcom1”, there is no password by default.
Solutions Provider for FTTx, RFoG and HFC www.ascentcomtec.com Page 9 of 79