ARF122B 1.2GHz MDU RF Amplifier
Solutions Provider for FTTx, RFoG and HFC www. ascentcomtec.com
Page 14 of 15
Note:
Prior to closing the unit, refer to
Section 4
for configuration instructions.
Prior to closing the unit, inspect the mating surfaces of the sealing edge. The ridge (see opposite) must be
continuous and not damaged or scratched in any way, and the sealing gasket must be in good condition.
IMPORTANT:
The IP67 rating of the ARF122B is dependent on the proper
sealing of all external unit interfaces. This includes all RF
connectors.
Ascent Communication Technology warrants its equipment to be free of manufacturing defects in material and
workmanship for a period of one year from date of shipment, provided it is installed and operated in accordance
with factory recommendations.
The liability of Ascent Communication Technology under this warranty is solely limited to repairing; replacing or
issuing credit provided that:
The warranty does not cover the following:
1.
Products purchased from someone other than an authorised Ascent Communication Technology dealer.
2.
Damage caused by accident, negligence, misuse, abuse, improper operation or failure to operate the
equipment within the manufacturer’s specifications.
3.
Damage caused by fluctuation in electrical current, lightning, power surges, etc.
4.
Damage resulting from overhaul, repair or attempt to repair caused by someone other than Ascent
Communication Technology’s qualified service personnel.
5.
Any product, in which the serial number has been defaced, modified or removed.
6.
Any product that has been opened or modified without prior written permission from ACT.
7.
Replacement of parts necessitated by normal wear and tear.
8.
Any consequential or implied damages.
