AP201CWT GPON 1 GE + WiFi ONT
Solutions Provider for FTTx, RFoG and HFC www. ascentcomtec.com
Page 5 of 32
Do not place the equipment near flammable or conductive items, high temperatures (such as
direct sunlight) or in wet conditions, or on a PC chassis, and check that the surrounding
appliances are stable.
Check the cable for aging. Check and verify that the AC or DC input voltage is within the
permissible range of the device and that the polarity of the DC is correct.
Unless the manufacturer permit, use the type of power indicated on the label and the adapter
supplied with the product.
To prevent damage to the product from lightning, make sure that the ground of the power
outlet and the power adapter is securely grounded. In the thunderstorm, be sure to unplug the
power and all the connections.
Equipment input voltage fluctuation should be less than 10%, the power plug, refrigerators, hair
dryer and iron should not use the same socket.
To avoid electric shock or fire due to overload of the power outlet, damage to the cord or
damage to the plug, check the power cord regularly. If damage is found, replace it immediately.
Please place the device on a flat surface and cannot place items on the device.
Equipment is easy to produce heat when working, should maintain the appropriate cooling
space to avoid damage caused by overheating products. The elongated hole on the shell is
designed for heat dissipation. Keep the ventilation clean and avoid falling from the heat sink
into the equipment. Otherwise, the equipment may be damaged or fire. Do not spill liquid onto
the surface of the equipment.
Please read the user manual carefully before using the equipment and follow all the
precautions on the user manual and the product.
Avoid eye looked at the optical interface directly, so as to avoid the laser beam emitted by the
interface damage the eyes. Please try to wear safety glasses to effectively protect your eyes
from damage. It is best to plug in the fiber optic interface jacket when the optical interface is
not in use.
Turn off the power when the device is not in use
Before plugging the power supply, make sure that the power switch is turned off to avoid surge.
Be careful when unplugging the power supply and the transformer temperature may be high.
To ensure safety, do not open the enclosure of the device, especially when the device is
powered up.
Unplug the power supply before cleaning the equipment. Use a soft dry cloth to clean the
equipment to avoid the use of liquids or sprays.
Do not connect this product to any electronic product unless it is instructed by our customer
engineer or your broadband supplier, as any incorrect connection may cause power or fire
hazard.
