Operating Manual PLK8
Version 2.08
Page 23
10.
EC Declaration of conformity
For machines according to the machinery directive 2006/42/EC in the current version.
Manufacturer:
Ascendor GmbH, Drautendorf 48, A-4174 Niederwaldkirchen
hereby declares under sole responsibility, that the product identified below:
Description:
Platform Stair Lift
Model and commercial description:
PLK8
Manufactured since:
01/2018
Complies with the relevant harmonisation legislation of the following European Union product directives:
•
2006/42/EC
Machinery guidelines and directives
•
2014/30/EU
Directive on electromagnetic compatibility of equipment
(If the product is delivered without radio remote control)
•
2014/53/EU
Radio Equipment availability directive
(If the product is delivered with radio remote control)
Technical specifications are in accordance with:
•
EN 81-40:2009
Safety regulations for the construction and installation of Stairlifts and
Inclined lifting platforms intended for persons with impaired mobility
•
EN ISO 12100: 2010
Safety of machinery
–
General principles for design
•
EN ISO 13850: 2007
Safety of machinery
–
Emergency Stop Function
•
EN ISO 60204-1: 2009
Safety of machinery
–
Electrical equipment of machines
Fulfils the specific requirements in acc. with Machinery guidelines and directives 2006/42/EG:
The product has been placed on the market in accordance with Article 12 (3) (b) of the Machinery Directive:
The machine is included in Annex IV of the Machinery guidelines and directives.
EC type examination according to Annex IX as well as internal production control according to Annex VIII
The EC type examination was carried out by TÜV AUSTRIA SERVICES GMBH, Deutschstrasse 10, 1230 Vienna,
NB 0408 and the following EC type examination certificate was issued:
TÜV-A-MHF / MG-10-01389 V
Fulfils the specific requirements in acc. with EMV-guidelines 2014/30/EU:
The product was placed on the market in accordance with Article 14 a), internal production control in
accordance with Annex II of the EMC Directive.
Fulfils the specific requirements in acc. with RED-guidelines 2014/53/EU:
The product has been tested in accordance with Article § 17 (2) a), b) or c) or Article § 17 (3) a), b) or c) or
Article § 17 (4) a) or b) of the RED- Directive
The administration of the technical documentation of this equipment is the responsibility of:
Ascendor GmbH, Technical Development and Documentation Department
Drautendorf 48, A-4174 Niederwaldkirchen, Austria
Any form of conversion or modification to the machine as well as the failure to observe the terms and instructions
provided in the original installation, operating and service manuals, will render this conformity declaration invalid.
