8
ACTIVELY STABILIZED CAMERA MOUNT
The actively stabilized
camera mount consists of:
1.
Breakout board with case.
2.
Pitch servo.
3.
Payload (e. g. Sony NEX-7).
4.
Extremely stiff and lightweight carbon
fiber mechanical structure.
5.
Roll servo.
MOTOR RAILS
The motor rails consist of:
1.
The propellers are directly bolted on the
motor shafts.
2.
Brushless motors are mounted …
3.
on the Motor clips.
4.
The landing feet are used to attach the
carbon cross to the motor rails of the
UAV.
5.
The data link antennas are attached to the
carbon cross close to the motor rails.
6.
Extremely stiff and lightweight carbon
fiber mechanical structure.
In each motor rail there are four brushless
motor controllers protected by the carbon tube.
CARBON CROSS
The carbon cross consists of four carbon tubes connected by a carbon part in the middle. The two
carbon tubes at the back contain the data link antenna wires.
