All rights reserved. No part of this publication may be reproduced, stored in a database, or transmitted in any form or by any means, electronic,
mechanical, recording, or otherwise, without the prior permission of ASC Group.
3
1
Overview
Application
The X-frame is a hip and knee guardrail that offers optimal security during the assembling of a Mobile
Tower. The X-frame is therefore not intended to be a structural integral part of a Mobile Tower.
List of components or different types
2
Assembly and use
Positioning of the Mobile Tower
Make sure you have the correct length for your product. Consult the product manual for the sizes.
Personal protective equipment
•
Always wear work gloves, safety shoes and a safety helmet.
•
Use a lifeline when working at heights.
Assembly
Aluminium Mobile Towers may only be erected by people with sufficient, proven experience.
According to the regulations, every rigger must also be in the possession of a valid certificate
"Scaffolding rigger (aluminium)"; this is in accordance with Dutch legislation and regulations.
In the country where you use this material, you must comply with the applicable regulations of that
country.
For checking for damage: see section 3.1.
There are no tools required for assembling a Mobile Tower. Use a drilling machine and a
spanner set when the Mobile Tower has to be anchored at the wall. For Mobile Towers from five
meters onwards, it can be useful to use a rope (with or without an accessory) to lift the
components.
Mobile Towers are not designed to be hoisted.
Nr.
Component
Number
1
X-frame 190
X190
2
X-frame 250
X250
3
X-frame 305
X305
4
X-frame 400
X400
Check all components ( use the list of components) that are required for
assembly, are present and undamaged. Damaged components should not be
used.
