1
SF013 Solar Stone Pump Kit
Instructions
By All Solar Central
www.allsolarcentral.com
Thank you from the entire ASC family for purchasing
an ASC solar product! Please read this entire booklet
before assembly.
Package contents:
1 x Water Pump with 16 ft. Cable
1 x LED Light Ring with 16 ft. Cable
1 x Solar Panel with Battery Pack
1 x Solar Panel Bracket
2 x Extension Tube
1 x Ground Spike
1 x Set of Fountain Nozzles
1 x Floating Foam
Notes:
If there is any damage to the product or missing
parts, please contact us at 1-626-582-8898 or
www.allsolarcentral.com/contactus
Assembly Steps:
1.
Position the solar panel so it’s facing south (in
northern hemisphere) as much as possible to
maximize daylight hours. It is important to angle
the solar panel to face the sun when the sun is at
its highest point. Ensure the solar panel is not
shaded by trees, shrubs or buildings.
2.
Connect the pump, LED Light to the Solar Panel
(See diagram below:)
IMPORTANT!!
Slightly twist the connectors when connecting to make
sure the rubber seals are fully in the grooves.
3.
The assembled Solar Pump should look like this:
4.
SOLAR WATER PUMP KIT OPERATION
This solar pump kit will work during the day time
and keep running until it runs out of battery at
night. LED lights will automatically turn on at
night to illuminate the spray.
a.
Press [On/Off] Button
on the back side of the
solar panel to turn on the pump, and the
battery indicator light will turn on. Press
again to turn off the pump, and the battery
indicator light will turn off as well.
