13
12
2
Remove the nozzle from the main unit.
Remove the rear-mounted rubber cap of the removed
nozzle to clean the inside.
Clean the nozzle with the accessory nozzle cleaning tool and wash it off with water.
Reinstall the nozzle.
Install the liquid catch canister an
cleaning is complete.
When removing the nozzle, hold its base and
carefully remove the right and left
fixed parts in order from right to left.
3
4
Wipe moisture from the nozzle,
replace the rubber cap, and
reinstall it.
Remove the nozzle with caution because
rough treatment may damage parts.
Be careful not to let water or dust into the unit.
Remove parts
marked with
an arrow from
one side and
then the other.
Remove dust with the nozzle
cleaning tool and wash it with water.
Cleaning the Filter
Remove the filter from the lid and wash it with water.
Cleaning the Nozzle
Cleaning the Filter
Remove the nozzle from the unit.
Make sure to turn the unit off before cleaning.
Make sure to turn the unit off before cleaning.
1
2
Open the cover of the liquid
catch canister to remove it
and its lid, and remove its
protection rubber.
Connection between tube and lid
※If there is severe
contamination or scratches
on the filter, it needs
replacement. Please contact the
store where you made the purchase.
Remove the filter from
the canister and wash
in water.
Connect the tube
to the nozzle.
Connect the filter-side
nozzle to the unit.
Filter
Preparing to remove the nozzle from the unit.
Set operating mode to seal mode and house
the nozzle.
Open the rear cover of the unit and remove
the liquid catch canister to reveal the nozzle
underneath the cover.
Revealing the nozzle
underneath the cover.
Remove the canister
with its lid
※Do not remove the tube.
Nozzle cleaning tool
Nozzle
Rubber cap
Do not hold the metal part of
the nozzle to avoid bending.
Please use a flat head
screwdriver as
illustrated if it is
difficult to detach
by hand.
Caution
Please hold
the root part
and pull out
the nozzle.
