INSTRUCTION MANUAL
● INTRODUCTION
Thank you for choosing the TEST PUMP EP440 / HIGH PRESSURE
CLEANER 440
To ensure safe and efficient operation, please read this manual thoroughly
before using equipment.
● CONTENTS
・ Main Specifications
P.3
・ Standard Accessories
【TEST PUMP EP440】
P.3
・ Standard Accessories
【HIGH PRESSURE CLEANER 440】
P.3
・ Safety Instructions
P.4
・ Operating instructions
P.5
・ Parts Identification
P.5
・ How to operate TEST PUMP EP440
P.6
・ How to operate HIGH PRESSURE CLEANER 440
P.7
・ Troubleshooting
P.8
● Main Specifications
Description
TEST PUMP EP440
HIGH PRESSURE CLEANER 440
Motor
200W (1/4 HP) Split-phase-motor
Maximum pressure
3.9MPa (40kg/cm
2
)
Power supply
（※Voltage made to order.） 50/60Hz
Operating pressure
3.4MPa (35kg/cm
2
)
Weight
9kg
Water volume (50/60Hz)
3.0/3.7 (L/Min)
Dimensions
L 270 x W 230 x H 210(mm)
● Standard Accessories
【TEST PUMP EP440】
① TEST PUMP body
② High-Pressure Hose(1m)
③ Pressure Gauge Unit
④ Suction Hose(2.5m)
⑤ Suction Filter
⑥ Relief Hose(2.5m)
⑦ Instruction Manual
⑧ Spanner
●
Standard Accessories
【HIGH PRESSURE CLEANER 440】
① HIGH PRESSURE CLEANER 440 Pump Body
② High-Pressure Hose(8m)
③ Spray Gun
④ Suction Hose(2.5m)
⑤ Suction Filter
⑥ Relief Hose(2.5m)
⑦ Instruction Manual
⑧ Spanner
● Safety Instructions
1. Secure machine and footing !
Make sure that machine is stable and keep proper footing and balance.
2. Keep work area clean !
Cluttered are as and benches invite accidents, Keep the work area clean
to ensure safety as well as high efficiency.
3. Keep visitors away !
All visitors, especially children, should be kept a safe distance from the
work area.
4. Select the place for safe keeping !
Store the pump in a dry place where children cannot get them.
5. Do not misuse machine !
Perform only the functions for which the machine is designed.
Do not force machine.
6. Do not abuse Power Cord !
Never move machine by cord or yank it to disconnect from receptacle.
7. Avoid dangerous environment !
Machine should not be operated in damp locations.
8. Disconnect Power Cord !
When adjusting, servicing or changing accessories Switch OFF and discon
-
nect Power Cord !
9. Avoid accidental starting !
Make sure that Switch is OFF before Plugging in.
10. Avoid dangerous environment !
Do not use machine near inflammable articles such as gasoline, gas,
thinner, etc.
Unless required, do not use an extension cord.
Use of an improper extension cord will cause a fire or an electric shock.
For outdoor operation, use a single-phase 15A extension cord of 2mm2 or
larger gauge.
11. Make sure of voltage !
Use the machine at the voltage indicated on Machine Plate.
12. Ground Pump !
The Pump should be grounded with the Earth Clip of Power Cord while in
use.
TEST PUMP EP440
HIGH PRESSURE CLEANER 440
1
2
3
4
