OEC3007 Troubleshooting Guide
Radio will not turn ON
•
Try the RESET button on the radio.
•
Check fuse on the radio.
•
Check 12V+ on the ACC+ wire on the two-pin main harness (RED wire).
•
Check Ground on the two-pin main harness (BLACK wire).
Radio turns ON, but no sound
•
Verify
Volume¸ Fader/Balance¸ Mute
controls are set correctly (see owners manual).
•
Try RESET button.
•
Verify proper speaker connections.
•
Check for shorts or opens on speaker wires.
CD does not load fully
•
Make sure unit has power and no other CD is currently inside.
•
Inspect radio’s chassis to verify shipping screw(s) have been removed.
CD does not play correctly
•
Check to make sure disc is inserted correctly.
•
Verify disc is free from dirt, scratches, etc.
•
Check with factory CDs.
•
Check factory original CDs for compatibility warnings (due to various copy-protection, multi-media content, etc).
•
Disc skips during playback – verify you have not exceeded 30 degrees mounting angle.
No AM or FM reception
•
Verify you are tuned to a valid station.
•
Check your antenna connection on rear of stereo.
•
Try a different antenna.
No TV antenna reception
•
Verify solid antenna connections on both sides of cable jack on entertainment center and also to aerial.
•
Verify crimped cable plug connection, check for shorts or exposed wires.
•
Verify the TV’s menu is set to the appropriate Air/Cable Setting.
No Power to 12 volt DC outlet
•
Verify solid 12 volt connection to rear of adapter.
•
Inspect for any debris inside adapter.
Page 1 of 2
