AZ800 user manual - hardware
Created by: MPuchner 07.2019
version: 9600021A
Original user manual
page 36 of 68
printed: 04.03.2020
8
Centre the azimuth axis
The azimuth axis can rotate ±340°.
It is absolutely essential that you make sure that the azimuth axis is in the
correct revolution before you start with the initial operation.
That means that you need to rotate the azimuth
axis to the centre of its movement range. Therefor move the azimuth axis by hand in one direction until you hit
the mechanical stop. Then rotate it back for one complete rotation (360°). Now the axis is in the centre of the
movement range.
Figure 30 - rotate azimuth axis
