AZ800 user manual - hardware
Created by: MPuchner 07.2019
version: 9600021A
Original user manual
page 30 of 68
printed: 04.03.2020
5.8
Connecting the focuser cable
Now connect the cable of the upper part to the clamp terminals as shown in the picture below. This cable
provides the power supply and data connection of the focuser.
The USB hub you can see on the following pictures is only present if your telescope is
equipped with 4 nasmyth ports (optional).
Older version:
Figure 22 - telescope top part cable connection (older version)
Terminal
#
function
wire colour of cable
coming from the telescope top
(older version)
1 +24VDC
brown
2 +24VDC
3 GND
4 GND
white
5 CAN Bus - H
green
6 CAN Bus - L
yellow
