background image

To obtain warranty service for your Audibox, call, write, or

Email to ARX or the dealer you purchased it from. They

will give you the correct address to send your unit to. Have

your sales receipt showing date of purchase handy, and in-

clude a copy of it with your Audibox. Please pack the unit

well - we are not responsible for any damage caused by

unsuitable packing during shipment. Send the unit to us pre-

paid, by a delivery service like FedEx, UPS, or any other

service that can track the shipment. We will return it to you

freight paid.

If you have any questions, or any part of this is unclear, please

write to ARX Systems in the country of purchase, or to the

address below.

PO Box 15,Moorabbin, Victoria 3189, Australia.

Phone: +61 (0)3 9555 7859  Fax: +61 (0)3 9555 6747

You can Email the factory at:

 [email protected]

Page 7

Page 6

Page 4

Page 5

ARX Systems (ARX) warrants to the first purchaser of this Audibox product

that it is free from defects in materials and workmanship under normal use

and service. ARX’s sole obligation under this warranty shall be to provide,

without charge, parts and labour necessary to remedy defects, if any, which

appear within twelve (12) months from date of purchase; and to supply

parts only for the life of the product to the original purchaser.

This is our sole warranty. It does not cover finish or appearance items, nor

does it apply if the Audibox has been, in ARX’s sole judgement:

• Subjected to misuse, abuse, negligence or accident;

• Repaired, worked on, or altered by persons not authorized by ARX,

• Connected, installed, adjusted or used otherwise than in accordance with

the instructions supplied by ARX.

This warranty gives you and us specific legal rights, and you may also have

other rights which can vary from state to state.

INTERNATIONAL LIFETIME WARRANTY

ISO Later

Input Impedance

600 Ohms

Output Impedance

600 Ohms

Frequency Response

20Hz - 20 KHz ± 0.1dB

Maximum Output Level

 + 24dBm

THD at Max Output

0.2% 30 Hz - 20KHz

Insertion Loss

0.75dB @ 1 KHz (600 Ohm source & load)

Input Connector

3 pin female XLR wired Pin 2 + Hot,

Pin 3 – Cold

Output Connector

3 pin male XLR wired Pin 2 + Hot,

Pin 3 – Cold. Audio grounds are unconnected.

Chassis Ground is connected to Output Pin 1

Construction

All-steel chassis, fibreglass PCB, ultra low

noise audio transformer

ISO Splitter

Input Impedance

300 Ohms

Output Impedance

2 secondaries @ 600 Ohms each

Frequency Response

20Hz - 20 KHz ± 0.1dB

Maximum Output Level

 + 20dBm

THD at Max Output

0.2% 30 Hz - 20KHz @ 20dBm

Insertion Loss

 1.6dB @ 1 KHz (600 Ohm source & load)

Input Connector

3 pin female XLR wired Pin 2 + Hot,

Pin 3 – Cold

Chassis Ground is connected to Input Pin 1

Output Connectors

3 pin male XLR wired Pin 2 + Hot,

Pin 3 – Cold. Audio grounds are unconnected.

Construction

All-steel chassis, fibreglass PCB, ultra low

noise audio transformer

Power Requirements

None. The ISO-Later and ISO-

Splitter are passive iso-transformer

coupled devices, 

ie.

 they don't need

power to run.

Please note that it is advisable to

power down the system before con-

necting the ISO-Later or the ISO-

Splitter, to avoid the risk of sending

large electrical and signal noises

through the system when discon-

necting and re-connecting

As well as the 

ISO-Later

 and the

ISO-Splitter

, ARX manufacture

other products in the unique

Audibox range:

The 

ISO Balancer

 for balancing

unbalanced signals, and also the 

ISO

De-Balancer

, which will de-bal-

ance a signal when required to con-

nect to an unbalanced input.

The 

AV-DI

 is a stereo AudioVisual

Active Direct box, with dual RCA

and stereo mini jack inputs plus dual

XLR outputs. Ideal for interfacing

consumer audio (especially compu-

ter sound cards) with professional

systems.

The 

Ear Driver

 is a Headphone

Amplifier with 2 pairs of Stereo in-

puts each feeding two channels of

headphone level outputs. It has in-

dividual Level controls plus a 12 -

15VDC power connector. A com-

pact, flexible unit

The 

Pro-D

I is an ultra compact Ac-

tive Direct box, with normal High

Impedance input as well as a sepa-
rate speaker level input for connec-
tion to instrument amplifiers.

Other features include –20dB Pad
and Audio Ground Lift switches,

plus Phantom or DC power op-
tions.
Available in Single Channel or Dou-

ble Header format

Did you know...

The 

DI-Pre

 is an Ultra compact Mi-

crophone Pre amp with XLR input,

balanced jack output and 10 to 60dB

Gain control.

Other features include –20dB Pad

switch, Clip LED and Phantom Power

switch, plus DC power connector.

Available in Single Channel or Dou-

ble Header format

For the latest information on the

complete Audibox range, visit our

website:

www.arx.com.au/audibox.htm

Using your Audibox

The ISO-Later is designed to be in-

serted into the audio signal chain to

fully isolate the audio signal and to

float the audio Ground. It is a self

contained, stand alone single or dual

channel unit with a balanced female

3 pin XLR input and a balanced male

3 pin XLR output. It will have appli-

cations in Live Sound, Studio or

Broadcast use.

The ISO-Splitter is designed to be

inserted into the audio signal chain

to fully isolate the audio signal, float

the audio Ground and split the out-

put. It is a self contained, stand alone

single or dual channel unit with a bal-

anced female 3 pin XLR input and

two balanced male 3 pin XLR out-

put. It will have applications in Live

Sound, Studio or Broadcast use.

About Ground/Earth
Loops

A short primer

Ground loops are caused or occur

when the ground connection in the

electrical mains power system is

duplicated by connections of

different impedance or resistance.

This difference causes an induced

potential difference or voltage to

either be produced or flow

between the various pieces of

equipment connected.

This phenomenon brings about the

effect we perceive as a HUM.

Transformer Isolation

By inserting a high quality audio

transformer (such as those used in

the ARX Audibox range) into the

signal chain we are able to break the

Pin 1/ Sleeve Audio Ground / Earth

connection, eliminating any Earth

loop induced hums.

For safety and noise reasons you

should ensure that both sides of the

signal chain are properly Grounded/

Earthed

Отзывы: