ArWest 01-00011-110, Руководство пользователя, Страница: 27 / 48

Command Line Interface
Serial Interfacing Commands
DPORT
27 www.arwestcom.com
The radio link with GMSK and 4FSK modulations are used by Non-ArWest protocols only.
Enabling FEC via LINK FEC command provides different options for different protocols:
- Enables Read-Solomon encoding for frame’s header used by ArWest proprietary protocols
- Enables Hamming encoding for Trimble and Pacific Crest compatible protocols
- Enables Trellis encoding for Satel compatible protocol
For ArWest proprietary protocols, the Read-Solomon FEC encoding is always applied to data
payload.
“Half Duplex” Base and “Half Duplex” Remote protocols are not supported in current release.
LINK ADDR and LINK CLKCORR commands are not recommended for using on site of End
Users.
3.3. Serial Interfacing Commands
3.3.1. DPORT
The DPORT is an object that responsible for data port interface configurations like Bit Rate, Flow
Control, etc.
DPORT [Parameter Name] [Parameters List] [/?]
Parameter Name Parameter List
RATE 0 – Maintenance Port baud rate, a default setting
1 – 1200 baud
2 – 2400 baud
3 – 4800 baud
4 – 9600 baud
5 – 14400 baud
6 – 19200 baud
7 – 38400 baud
8 – 57600 baud
9 – 115200 baud, a default setting
BITS Set number of bits in one byte (8 or 7)
8 is a default setting
PARITY 0 – None, a default setting
1 – Odd
2 – Even
FLOW 0 – None, a default setting
1 – Not used
2 – HW (RTS/CTS)