Chapter 6: Enhanced Stacking Commands
92
SHOW REMOTELIST
Syntax
show remotelist [sorted=
macaddress
|
name
]
Parameter
sorted
Sorts the list either by MAC address or by name. The
default is by MAC address.
Description
This command displays a list of the switches in an enhanced stack. This
command can only be performed from a management session on a
master switch. The list does not include the master switch on which you
started the management session.
Note
You must perform the SHOW REMOTELIST command from a
management session of a master switch. This command will not
work from a management session of a slave switch. To determine
the master or slave status of your switch, use
Example
The following command displays the switches in an enhanced stack,
sorted by MAC address, the default sorting method:
show remotelist
The following command displays the switches sorted by name:
show remotelist sorted=name
