AP-270-MNT-H2 Mounting Kit
Installation Guide
0511782-03 |
April 2015
1
Package Content
AP-270-MNT-H2 Mounting Bracket x 1
M6x20 Screws x 2
Installation Guide (this document)
Installation
1. Use the AP-270-MNT-H2 as the template to mark the four mounting points on the wall.
2. Use a drill to make four holes on the four markings from the previous step.
3. Insert an anchor bolt (not included in the package) into each drilled hole.
4. Place the mounting bracket over the anchor bolts and press the bracket against the wall.
5. Place the washers and nut onto the bolt’s threaded end and tighten the nut until the mounting
bracket is firmly attached to the wall.
Figure 1
Attaching the Mounting Bracket to a Wall
The AP-270-MNT-H2 mounting kit supports multiple access point (AP) models. All installation images show the
277 AP.
