Aruba 800-E, Руководство по установке

Страница: 35 / 52

Aruba 800-E 27
Installation Guide
Troubleshooting
5
Access Multiplexer Support
Access Levels
„
User Access
User access is a low security level that features only the most basic user
commands. It is available without any additional login after the Access
Multiplexer has booted.
„
Privileged Access
Privileged access requires the privileged password (the same privileged
password used on the Mobility Controller) to be entered using the user level
enable
command. Privileged Access is available only after the Access
Multiplexer has successfully booted and synchronized with the Mobility
Controller.
User Commands
„
ping <host|IP address>
Verify IP connectivity between the Access Multiplexer and the host address.
Figure 5-1 illustrates the WebUI screen that must be accessed to obtain that
information.
F
IGURE
5-1 Diagnostics Network Screen
„
route
Display the contents of the Access Multiplexer route table.