Aruba 800-E, Руководство по установке

Страница: 33 / 52

Aruba 800-E 25
Installation Guide
Configuring the 800-E From the WebUI
Chapter 4
Verify the Access Multiplexer Settings
The setup dialog script settings should be reflected on the Configuration >
Switch page. To verify these settings:
1. Navigate to the Configuration > Switch page.
2. Select the General tab.
3. Verify that the IP address of the MUX Server is correct (as set in the setup
dialog when you first booted the switch).
4. Complete any other L-2 switch settings (time, spanning tree, etc.) as desired.
F
IGURE
4-5 Verifying the Access Multiplexer Configuration