Installing the switch
|
54
3. Predetermine the orientation of the switch in the rack, front facing or side facing, then attach the
switch to the DIN rail.
Aruba Side Enforcement Bracket Kit for Aruba Switches (optional)
The optional Aruba side enforcement bracket kit (5400-4042) is used to stabilize supported switches in
extreme environments, such as railway applications. This side enforcement bracket kit reinforces the
mounting solution and supports the device mounted to the DIN rail. This bracket is designed for constant
or more severe vibration and shock conditions. For rear mount orientation only.
The illustrations may not match your particular switch model.
Kit Contents:
n
Clip assembly: Out-bracket (2), In-bracket (2), Pre-installed screws (4)
n
T-bracket (2)
n
Screws with washers (4)
To install the side enforcement bracket kit:
1. Remove the existing six screws in the rear panel with a T-20 torx screwdriver.
