Arturia PolyBrute, Руководство пользователя

Страница: 86 / 112

11.3.2. Delay sync options
Hold [Settings] and turn Delay Time to view the “Delay Time Mode” menu. Use [Assign 1-4] to
specify whether the delay is synced to the master clock or not, and which time division it
uses when synced.
•
Hertz:
not synced
•
Binary, Triplet,
or
Dotted:
synced
When one of the synced options is selected, the delay time division is displayed as the Delay
Time knob is turned.
11.3.3. Delay filter options
Hold [Settings] and turn Regeneration to view the “Delay Filters” menu. Highpass and
Lowpass options are available, and one selection can be made from each column. Use
[Assign 1-4] to select the HP option, and use [Assign 5-8] to select the LP option.
11.4. Reverb
Reverb Level
controls the output of the selected Reverb effect.
Reverb Time
adjusts the time it takes for the Reverb to decay.
Reverb Type
selects one of these options:
•
Hall
recreates the reflections of a fairly large acoustic space.
•
Plate
simulates the famous reverberation units found in some famous studios.
• Alt (Alternate): Hold [Settings] and press [Reverb Type] to view the Reverb Custom
Type. These five variations are the ones that can be selected for (and saved with)
the patch you're creating:
◦
Bright Plate
◦
Room
◦
Dreamy
◦
Spring
◦
Delayed Plate
Damping
controls how quickly the higher frequencies decay. A gradual roll-off is heard from
high to mid, with the low frequencies the last to disappear.
11.4.1. Reverb filter options
Hold [Settings] and turn Damping to view the “Reverb HP Filter” menu. Use [Assign 1-4] to
select the HP filter cutoff: Bypass, Low, Mid, or High.
80 Arturia - User Manual PolyBrute - The Effects