Arturia MICROFREAK Скачать руководство пользователя страница 27

Страница: 27 / 104

4. THE MICROFREAK PRESETS

We at Arturia invite to create your own presets. There are so many fantastic sounding

synths these days with an overwhelming number of presets that it is easy to get lost in

an endless search for the magic sound. In the end, the best sound preset is the one you

create yourself, because only you know what sort of sound you're after. And as a bonus,

you teach yourself the skills you need to create sounds that match your sonic ideal. So....let's

get started!

4.1. Loading Presets

Turn the Preset encoder to load a preset. To get started you can select one of the 128 factory

presets. However, you may want to keep those intact if you have limited experience with the

MicroFreak or with music synthesis in general. In that case, select one of the presets in the

range 129 to 256 to save your sounds.

Note:

Presets in the range 129-160 are template presets, you can use them as a starting point

to create specific categories of sounds. If you have created a particularly interesting preset

you can also save as a template to be used for further exploration.

You can now tweak the preset to give it your flavor. If you like what you hear, remember to

save it.

Warning!

If you turn the encoder to load another preset, you'll lose the changes you made

to the original Preset. So use the encoder with care: by default, switching presets clears

any modifications done on the previously loaded preset, without a warning message. If you

don't like this behavior, you can change a setting in Utility called "Click to Load". With that

setting ON you can scroll through presets without losing the modifications of the preset you

are currently working on. It's only when you click the encoder that the new preset will load

and your modifications saved. Press Utility>Browsing>Click to Load to change this setting.

Note:

There's a nifty trick that enables you to erase the content of the current preset quickly:

press the preset encoder quickly three times in a row. This will reset the preset to its initial

empty state. It is also an excellent way to clear existing presets.

4.2. Saving Presets

You probably know what it is like to ruin a brilliant patch with one wrong decision and to

discover that you can't go back to that moment because you forgot to save your patch.

That's why we've put the Save button right next to the browsing encoder. Press the Save

button to enter "save" mode. Once in save mode, you can:

• save your preset to the current slot or to a different location
• modify preset category
• rename your preset

the Preset encoder

Arturia - User Manual MicroFreak - The MicroFreak Presets

Содержание MICROFREAK









































































































Результаты поиска

Содержание MICROFREAK

Отзывы:

Бренды по названию

Популярные бренды

Arturia MICROFREAK, Руководство пользователя

Результаты поиска

Содержание MICROFREAK

Отзывы:

Бренды по названию

Популярные бренды