8.2.12. Tape Echo
The Tape Echo pedal is a recreation of a famous tape echo unit from the 70s and 80s, which
worked by recording snippets of the input audio onto magnetic tape, then playing them
back with a delay. Due to the nature of magnetic tape, this imparts a natural tape saturation
effect to the delays.
Controls
Description
Bass
Controls the volume of low-frequencies (tone-control).
Treble
Controls the volume of high-frequencies (tone-control).
Time
Controls the time it takes for the delay line (this time "echo" line) to be played back.
Sync
This switch turns On synchronization of the echo time through MIDI with the host. When On, the
delay time is expressed in musical values.
Intensity
Basically controls the number of echoes that are produced, therefore, the intensity of the effect.
Input
Controls the volume of the signal input in the unit for processing.
Echo
Controls the volume of the processed sound that comes out of the unit.
Dry/Wet
Controls the balance between processed and unprocessed sound.
♪
: Remember that you can change the order of the effects by drag-and drop them between the slots.
The dragged effect will change place with the one that was in that slot.
Arturia - User Manual Mellotron V - Mellotron V Effects
72
Содержание Mellotron V
Страница 1: ...USER MANUAL...