Arturia DRUMBRUTE IMPACT, Руководство пользователя

Страница: 53 / 107

4.2.8. Copy a Drum Track
Once you have the timing and dynamics exactly right for a certain instrument you might
want to use that track in another pattern, or maybe even double that track on another
instrument within the same pattern. The following procedures will save you the time it would
take to recreate the part somewhere else.

♪ : If the time division of the target pattern is different from the source pattern they will not sound the
same at first. You may want to change the time division of the target pattern until it matches the source
pattern. See the
Time Division section [p.38] for information.
4.2.8.1. What is copied between instruments?
Copying an instrument track to the same instrument in another pattern will preserve the
instrument Color Mode [p.44] status and Color Step [p.36] data. For example: If you copy
Snare 1 from pattern 2 and paste that to Snare 1 on pattern 4, the Color Mode status and
Color Step data are copied along with the other Step data (on/off status, accent), plus the
track length, swing settings, etc.
However, if you copy an instrument to a different instrument in any pattern, even the same
pattern, the Color information will not be copied. For example: If you copy Snare 1 from
pattern 2 and paste that to the Cymbal track on pattern 4, the Color Mode status and Color
Step data are NOT copied, but the other track information will be preserved (on/off status,
accent, track length, swing settings, etc.).
4.2.8.2. Within a pattern
Let’s say you’d like to copy the FM Drum track to the Tom Low track. This is a bit trickier
than normal, because you’ll be copying from a single instrument to a shared instrument
channel. But even this process is so easy that you’ll have no trouble with copying between
single-channel instruments.
Select a pattern with an interesting FM Drum part and then follow these steps:
• Press and release the Copy button. The Copy, Bank and Ptrn buttons and all of
the pads will flash.
• Press the FM Drum pad. This is the track that will be copied.
• Press the instrument select button for the Tom Hi / Tom Low shared channel until
the Tom Low LED is lit.
• Tap the Tom Hi / Tom Low pad. It will flash quickly so you will know the process
is complete.
When copying between single-channel instruments, simply skip the third step in the
process.
Arturia - User Manual DrumBrute Impact - Pattern Mode 48