Arturia CZ V Скачать руководство пользователя страница 53

Страница: 53 / 98

5.5. MSEG envelopes

The MSEG (Multi-segment) envelopes are the most flexible envelopes of all. They can contain

up to 16 points, with independent time, level, and slope values for each stage. At the top

of an MSEG envelope window you can select from a predefined set of envelope presets (11

different ones for an unsynced envelope, and 9 different synced envelope presets). They

also can be looped and synchronized to a master clock.

When you click on a point, a halo appears around it and the data about that point is shown

at the bottom of the envelope window: the number of the point, its time, its level, and its

slope.

5.5.1. Editing an MSEG envelope

Editing an MSEG envelope is similar to editing a CZ envelope. The round circles are called

"points". They may be clicked and dragged to make changes. For more precise edits, click

and drag the appropriate value field underneath the graphic; hold the Control key or right-

click as you drag for fine tuning.

5.5.2. Points

Click a point to select it, or click the Point number field and drag it up and down to select the

point to be edited. To add another point, click anywhere in the envelope field. Up to 16 points

are possible.

Right-click a point to remove it. If you double-click a point, it will become the Sustain point.

To zoom in and out, drag the ruler in the upper part of the window up and down. Drag the

ruler left and right to access points outside the viewing area; or double-click the ruler to

zoom to the size of the envelope.

5.5.3. Adjust the Time

This sets the length of time it will take to reach this point from the previous point in the

envelope. Changing this value will also affect the length of time it will take to reach the next

point in the envelope from the current point.



♪

: Unlike the other envelope types, MSEG times are absolute: the time it takes to get from one stage

to another isn't affected by the Level of the points.

A 16-point MSEG envelope

Arturia - User Manual CZ V - ENVELOPES

Содержание CZ V



































































































Результаты поиска

Содержание CZ V

Отзывы:

Похожие инструкции для CZ V

Бренды по названию

Популярные бренды

Arturia CZ V, Руководство пользователя

Результаты поиска

Содержание CZ V

Отзывы:

Похожие инструкции для CZ V

Бренды по названию

Популярные бренды