Art's Way X550, Руководство оператора и иллюстрированный список запасных частей

Страница: 17 / 84

ART’S-WAY MANUFACTURING COMPANY, INC. Manual No. 725755
OPERATOR’S INSTRUCTIONS: MANURE SPREADER 15
SAFETY
TRANSPORTING SAFETY PRECAUTIONS
WHEN TRANSPORTING A LOADED SPREADER, USE REDUCED SPEED
AND BE SURE THE VEHICLE HAS ADEQUATE BRAKES TO SAFELY STOP.
• DO NOT ALLOW ANYONE TO RIDE ON OR INSIDE THE SPREADER.
• REDUCE SPEED WHEN TRAVELING
loaded and/or over rough, soft, or wet terrain.
Exercise caution on side slopes and when turning corners.
• AVOID OPERATING THE SPREADER CROSSING GULLIES OR DITCHES.
• WHEN WORKING ON SLOPES
or inclines, travel uphill or downhill. Keep the transmission
in gear when going downhill.
• AVOID DRIVING ON
loose fill, rocks, inclines ditches, and holes.
• ALWAYS PARK
the spreader on level ground and place wheel chocks ahead of and behind
wheels..
• IF UNIT IS FOR HIGHWAY TRANSIT
the end user is responsible for federal, state, and
local vehicle safety regulation compliance (example: under ride requirements, lighting, and
weight limitations.)
SAFETY DECALS
SAFETY DECALS ARE PLACED ON THIS UNIT FOR THE PROTECTION OF THE
OPERATOR OR ANY PERSON NEAR THE UNIT.
• BE SURE EVERYONE WHO OPERATES THE SPREADER UNDERSTANDS ALL
THE INFORMATION, WARNING, CAUTION, AND DANGER DECALS.
• KEEP THE DECALS CLEAN
so they are readable. This applies to all caution, warning, and
danger decals.
• IT IS THE OWNER’S RESPONSIBILITY
to provide information for safe operation of this
machine.
• REPLACE ANY DAMAGED OR WORN DECALS.
Once any part of a decal becomes
non-readable, it should be replaced. Replacements may be ordered through your dealer or
Art’s Way Manufacturing.
• WHEN REPLACING DECALS,
be sure the surface area is clean and dry, peel the backing
off the decal, and apply to the unit in the appropriate location. Be sure to wipe with clean cloth
to rub out all air bubbles to assure a good seal. For the best adhesion decals should be aplied
in temperatures of 50°F or warmer.