background image

Manual No. 725755 

ART’S-WAY MANUFACTURING COMPANY, INC.

SAFETY INSTRUCTIONS

GENERAL

Most work related accidents are caused 

by failure to observe basic safety rules 

or precautions.  An accident can often 

be avoided by recognizing potentially 

hazardous situations before an accident 

occurs.  As you operate and maintain the 

Spreader you must be alert to potential 

hazards.  You should also have the 

necessary training, skills, and tools to 

perform any assembly procedure.

Improper operation and/or maintenance 

of this unit could cause a dangerous 

situation that results in injury or death.
Do not use this unit until you read and 

understand the information contained in 

this manual.  Do not use this equipment 

for anything other than its intended 

purpose.

  Safety precautions and warnings 

are provided in this manual and on 

the unit.  If these hazard warnings 

are not heeded, bodily injury or 

death could occur to you or to other 

persons.

Art’s-Way Manufacturing Co., Inc. 

cannot anticipate every possible 

circumstance that might involve 

a potential hazard.  The warnings 

in this manual and on the product 

are, therefore, not all-inclusive.  If a 

method of operation not specifically 

recommended by us is used, you must 

satisfy yourself that it is safe for you 

and for others.  You should also ensure 

that the unit will not be damaged or be 

made unsafe by the methods that you 

choose.

The information, specifications, and 

illustrations in this manual are based on 

the information that was available at the 

time this material was written and can 

change at any time.

Safety Alert Symbols

This is the safety alert symbol. It 

is used to alert you to potential 

personal injury hazards. Obey all 

safety messages that follow this 

symbol to avoid possible injury or 

death.
This manual contains DANGERS, 

WARNINGS, CAUTIONS, NOTICES, 

SAFETY INSTRUCTIONS, and NOTES 

which must be followed to prevent the 

possibility of improper service, damage to 

the equipment, personal injury, or death. 

The following key words call the readers 

attention to potential hazards.
Hazards are identified by the “Safety 

Alert Symbol” and followed by a signal 

word such as “DANGER”, “WARNING”, or 

“CAUTION”. 

SAFETY
INSTRUCTIONS

Remember:   

“The Best Operator is a Safe Opera-

tor” 

CAUTION

  Read and understand the opera-

tor’s manual and all the safety 

decals before operating the 

spreader. Review all safety instruc-

tions with all operators annually. 

SAFETY INSTRUCTIONS

Содержание X550





















































































Отзывы: