33
Alt= to hide template information
Alt+ to display template information
Template Name: OML_1_col
Rac 0-00000
Template Date: 1997_02_12
8 - LUBRICATION
LUBRICATION
Lubrication Chart
Use NGLI No. 2 Multipurpose Lithium grease or equivalent .
Note
1
: The number of points will vary with the number of furrows.
Note
2
: The wheel bearing on each wheel must be disassembled, cleaned and lubricated once each year or every
500 hours of operation.
N
FREQUENCY IN HOURS
O
.
O
L
F
O
C
P
G
C
A
O
R
C
C
H
T
I
E
H
L
A
I
N
A
O
E
E
N
O
T
S
I
C
A
G
N
SERVICE POINTS
S
E
L
K
N
E
1 Rollover Frame Pivot - Left Side
2
50
2 Hydraulic Rollover Cylinder
1
50
3 Gauge Wheel Hub Bearing
1
200
4 Furrow Wheel Bearing (if equipped) (Note 1)
X
10
5 Colter Bearing (Note 2)
X
100
Lubrication Guide
1. Be certain that all lubrication fittings are
assembled in place. Refer to the following chart
and illustrations to locate all fittings.
2. Always lubricate the plow thoroughly before
taking it to the field. Use a pressure lubricating
gun as necessary.
3. Be sure all fittings are free from dirt and paint so
the lubricant is certain to enter the bearing.
4. Always force the lubricant through the full length
of each bearing until it emerges at the end,
carrying with it the worn lubricant and any dirt
that may have entered the bearing.
5. Miscellaneous working parts not provided with a
lubrication fitting should be oiled daily with a
good grade of lubricating oil.
6. Keep your supply of lubricating oil and grease
stored in clean covered containers to protect it
from dirt and dust.
7. Keep lubricating gun nozzle clean and wipe
excess dirt from grease fitting before applying
lubricant.
