21
Once discovery is completed, the bottom line shows the total number discovered and the backlight
will blip green or red to indicate success or whether errors occurred.
When would I use this?
You need to perform discovery once after powering on Micro-Scope 3c, and prior to using any other
function in the DMX-RDM menu. You should also perform discovery if you add or remove any
devices to the DMX cable.
DMX
–
RDM - PATCH Menu
DMX-RDM-PATCH is us
ed to view an RDM device’s name, footprint, number of sub
-devices, number
of personalities and to edit its start address and personality.
Keys operate as follows:
LEFT
and
RIGHT
Navigate through the option fields.
LEFT
+
RIGHT
Identify the selected device.
UP
and
DOWN
Select the required value within an option field.
TOGGLE
Sets or programmes the start address and personality into the selected device(s).
The option fields function as follows:
DEV
Selects the RDM device. Devices are numbered from 1. A value of zero is displayed as ALL
and indicates that all RDM devices are being controlled. This is a very powerful feature but
should be treated with caution as it allows, for example, all start addresses to be set to the
same value. NB. The device number is enumerated during discovery and numbers are
allocated in the order in which devices are discovered. The order may change when
discovery is next executed.
SUB
Selects the sub-device. An RDM device may have a number of sub-devices and Micro-Scope
3c is able to access 999 sub-devices. There are two special cases of sub-device. Zero
accesses the root device. ALL indicates that all sub-devices are being controlled.
NAME
When an individual device or sub-device is addressed, the name of the device or sub-
device is displayed here. If ALL devices and/or ALL sub-devices is selected, BROADCAST is
displayed in order to emphasise that pressing TOGGLE will affect multiple entities.
DISC:
ADD ALL
Search 6
DISC:
ADD ALL
Done 6
D:
DEV
-
SUB
S:
STA
NAME P:
PER
Содержание Micro-Scope 3c
Страница 1: ...Micro Scope 3c User Guide Artistic Licence Engineering Ltd Firmware v1 7 User Guide v8 3 ...
Страница 2: ...2 ...
Страница 5: ...5 Compliance 42 Waste Electrical Electronic Equipment WEEE 42 ...
Страница 6: ...6 ...
