ARTHUR MARTIN AW6S7056AX, Руководство пользователя

Страница: 27 / 64

Problem Possible solution
Too much foam in the
drum during the washing
cycle.
• Reduce the quantity of detergent.
After the washing cycle,
there are some deter‐
gent residues in the dis‐
penser drawer.
• Make sure that the detergent insert is in the correct position.
• Make sure you have used the detergent dispenser according
the indications given in this user manual.
After the check, activate the appliance. The programme continues from the point of interruption.
If the problem occurs again, contact the Authorised Service Centre.
CONSUMPTION VALUES
Stated values are obtained in laboratory conditions with relevant stand‐
ards. Different causes can change the data: the quantity and type of laun‐
dry and ambient temperature. Water pressure, the supply voltage and the
temperature of inlet water may also affect the washing programme dura‐
tion.
Technical specifications may be changed without prior notice to improve
the quality of product.
Programmes Load
(kg)
Energy
con‐
sump‐
tion
(kWh)
Water
con‐
sump‐
tion (li‐
tre)
Approxi‐
mate
pro‐
gramme
duration
(mi‐
nutes)
Remain‐
ing
mois‐
ture
(%)
1)
Coton
60°C
7 1.41 79 230 60
Coton
40°C
7 0.96 80 205 60
Synthétiques
40°C
3 0.68 68 130 37
Délicats
40°C
1,5 0.60 51 60 37
Laine
30°C
1,5 0.17 49 70 32
Standard cotton programmes
Standard 60°C cotton
7 0.93 51 220 60
27