２４
7) Scratch along the locating slot of roll brush with blade to cut and clean the
air. After it, install the floor brush well again and close the roll brush cover.
To slide a blade of scissor along the groove of the Brush Bar to cut the hairs
twisted around. After cleaning, insert the Brush Bar into the Floor Brush and
slide the End Cap clockwise to fasten it.
Fig. 6-7a
Fig. 6-7b
NOTE: It is recommended to clean the duct cup after every use. If the HEPA
filter is blocked caused by the accumulation of dust, please clean or replace it
in time. The electric roll brush may be wrapped with some hair or other floccule
after long time use, so please clean it in time to make the appliance work
efficiently.
7. ELECTRICAL PARAMETER
Product model
AMP121
Working voltage
DC 18V
Rated power
100W
Adaptor model
JOD-S-220050GS/BLJ15L220050P-V
Adaptor input
100-240V 50/60Hz
Adaptor output
22V 500mA
Electric floor brush rated power 10W
