DrillSaw Sports 400™ System
User’s Guide
DFU-0253-4r0_fmt_en-US
Page 26 of
46
Setup - Wire/Pin Driver Attachment
These instructions describe the procedure for inserting a pin to the AR-400 pin driver
attachment.
Figure 14
Inserting a wire /pin
Table 19
Inserting a wire/pin
1.
Press the wire/ pin into the retaining mechanism at the opening of
the attachment.
2.
Slide the wire/pin into the driver until the desired length is
reached.
3.
Press the lever to hold the wire/pin in place while driving the
wire/pin.
-
Positive tension from the lever and retaining mechanism
will hold wire/pin in place when the instrument is handed
to the surgeon.
1 & 2
3
