ARTEX/ACR Electronics, Inc.
A3-06-2824 Handheld Programmer Operations Manual
Y1-03-0272 Rev. F
Company Confidential
Page 27
4.7.4
Serial User / Aircraft 24-Bit Addr/Ntl (Short)
1.
Select ELT Baud rate.
2.
For the ELT 345 and ELT 1000, refer to Note 1 on page 23 before continuing.
3.
For the ELT 3000 and ELT 4000, refer to Note 2 on page 23 before continuing.
4.
Select Protocol.
NOTE
: Country Code will be blank. It will automatically be selected by entry of
a valid 24-Bit Aircraft Address.
5.
Select the desired number system (Octal: 8 digits from 0-7 or Hex: 6 digits from
0-9 or A-F) to match the format of the 24-bit address provided.
6.
Go to Graffiti Screen and tap on letter/numbers.
7.
Enter the 24-bit address.
NOTE
: The 3-digit country code is automatically determined from the country
data encoded in the 24-bit address.
8.
Enter the National Use designated number.
9.
Enter number of additional ELTs.
•
This particular number field represents the number of additional ELTs on
board an aircraft, beyond the primary ELT.
•
Enter “0”
if there is only one ELT on-
board, and “1”, “2”, etc., correspond
ing
to the number of additional ELTs installed on the aircraft.
10.
Tap
“
Done
”
when finished.
11.
Tap “ENTER” button on Program screen
. The 24-digit hex code is shown at the
bottom of the screen, with the abbreviated 15-digit hex code below it.
12.
For ELT 345s or ELT 1000s only:
tap “Program”; quickly place ELT switch in
the test mode and release. (Quickly is <1 second).
13.
Tap the “Program” button to program the ELT
.
14.
Ensure that scree
n shows “Programming Successful”.
15.
Verify ELT u
sing “Sarcalc”
, as described in Subsection 6.2.
4.7.5
Serial User /
Aircraft Operator Designator (Short)
1.
Select ELT Baud rate.
2.
For the ELT 345 and ELT 1000, refer to Note 1 on page 23 before continuing.
3.
For the ELT 3000 and ELT 4000, refer to Note 2 on page 23 before continuing.
4.
Select Protocol.
5.
Select Country Code.
6.
Go to Graffiti screen and tap on letter/numbers.
7.
Enter Aircraft Operator Designator - (three digit assigned code)
8.
Enter the COSPAS-SARSAT TAC number.
