Artesyn MITX-CORE-820 Скачать руководство пользователя страница 88

Страница: 88 / 133

BIOS

MITX-CORE-820 Installation and Use (6806800M10H)

5.4.2.7.1 Intel(R) VT for Directed I/O (VT-d)

5.4.2.7.2 Graphics Configuration

Table 5-15 Intel(R) VT for Directed I/O (VT-d) Field Description

Field

Description

Intel(R) VT for Directed I/O
(VT-d)

Enables/Disables Intel(R) Virtualization Technology for Directed
I/O (VT-d) by reporting the I/O device assignment to VMM
through DMAR ACPI tables.

Table 5-16 Graphics Configuration

Field

Description

Primary Display Selection

Selects the primary display device.

DVMT Pre-Allocated

Selects pre-allocated graphics memory size used by the internal
graphics device. This has no effect if external graphics are
present.

DVMT Total Gfx Mem

DVMT5.0 DVMT graphics memory size. This has no effect if
external graphics are present.

GT Turbo Mode Control

Enables/Disables GT Turbo Mode Control.

IGD Configuration

IGD Configuration. See

IGD Configuration

Содержание MITX-CORE-820






































































































































Результаты поиска

Содержание MITX-CORE-820

Отзывы:

Artesyn MITX-CORE-820, Инструкция по установке и эксплуатации, Страница: 88 / 133

Результаты поиска

Содержание MITX-CORE-820

Отзывы: