manualshive.com logo in svg

Artesyn MITX-CORE-820, Инструкция по установке и эксплуатации, Страница: 32 / 133

Поделиться
Скачать
Artesyn MITX-CORE-820 Скачать руководство пользователя страница 32

Chapter 1

MITX-CORE-820 Installation and Use (6806800M10H)

31

Introduction

1.1

Overview

MITX-CORE-820 is an Artesyn designed Mini-ITX motherboard based on Intel® 6 Series Chipset 
supporting Intel® Sandy Bridge Mobile rPGA Quad/Dual core processors.

1.2

Features

The following table lists the features of the MITX-CORE-820 motherboard.

Table 1-1 MITX-CORE-820 Features Summary  

Function

Features

CPU (rPGA988B Socket)

Supports one 45 W 4-core Core i7 Intel Sandy Bridge-Mobile 
rPGA 988B embedded processor.

Intel AMT 7.0, Turbo Boost

Also provides the option to support one 35 W 2-core Core i5 
Celeron Intel Sandy Bridge-Mobile PGA embedded processor.

Chipset

Intel 6 Series PCH

Memory Feature

 Supports up to 16GB dual-channel, non-ECC, unbuffered 
DDR3 SO-DIMM

 Up to 1600 MT/s

Embedded Controller

Nuvoton NPCE791C

Audio

 Audio on board (ALC888S-VC)

 Rear Panel: 5 audio jacks + 1 SPDIF output, Front Panel: 2 re-
tasking audio jacks, 2nd SPDIF output header (optional)

LAN

Intel WG82579LM, Intel WG82574L

USB

High-speed Enhanced Host Controller interfaces (EHCI) that 
supports 12 ports(4 rear/6 on header (one header can be used as 
eUSB connector) /1 PCIe Mini Card/1 Display Mini PCIe Card)

Expansion slots

1x PCIe 16x Slot Supports Gen 2

Rear panel ports

4 USB2.0 ports, 2 Display Port, Audio Jack, DC-In Jack, 2 RJ-45 Ports 
(one for MITX-CORE-810), VGA/COM Port

Power Connectors

12 V or 14.4-19.5 V DC-IN Jack / 4-pin ATX_12V connector. Only 
one can be plugged at a time

Содержание MITX-CORE-820






































































































































Отзывы:

Нет отзывов