Artesyn MITX-CORE-820 Скачать руководство пользователя страница 100

Страница: 100 / 133

BIOS

MITX-CORE-820 Installation and Use (6806800M10H)

5.7

Accessing the MEBX Setup Menu

The following procedure allows you to access the MEBX setup menu:

1. During BIOS POST, press the hotkey F4.

2. Disable the Intel AMT hotkey function in the BIOS setup. Select "Advanced", choose "Intel

AMT configuration" then select "Intel AMT hotkey".

3. Enable the Intel AMT setup prompt that is located on the same page. Save and exit. During

the BIOS POST, press CTRL+P.

5.8

BIOS Update

The following procedure allows you to update the BIOS:

1. Prepare a dos bootable USB thumb drive.

2. Get the BIOS flash tool Pflash.exe from the BIOS vendor.

3. Copy the Pflash.exe and BIOS ROM file into the USB thumb drive.

4. Power on the MITX-CORE-820 board.

5. Press <F2> to enter the BIOS setup menu.

6. Select the USB thumb drive as the first boot device.

7. Save and reset, then the enclosure will boot from the USB thumb drive.

8. Run the command Pflash BIOS.ROM /bbl /cvar /sa to flash the BIOS.

0xED

POSTCODE_EC_IPL_DXE

0xEE

POSTCODE_EC_IPL_PPI

0xEF

POSTCODE_EC_DXE_ARCH

Table 5-33 Architectural Status Codes (continued)

Status Code

Code Symbol

Содержание MITX-CORE-820






































































































































Результаты поиска

Содержание MITX-CORE-820

Отзывы:

Artesyn MITX-CORE-820, Инструкция по установке и эксплуатации, Страница: 100 / 133

Результаты поиска

Содержание MITX-CORE-820

Отзывы: