HDD-500G-SATA
Quick Start Guide
P/N:6806800M51B (September 2014)
Observe ESD-safe
measures
What’s in the box?
Attach the tape
When installing or servicing the
module or accessories, strictly
observe the safety precautions in the
Safety Notes Summary
. Otherwise,
personal injury or property damage
may occur.
• Use either a properly grounded ESD wrist
strap or make sure that you are working
in an ESD-safe environment.
• Connect to the ESD connector at the
front or the rear of the system.
Make sure you receive all items of your
shipment:
• One HDD-500G-SATA
• Four standoffs
• One tape
• One SATA mounting plate
• Four M3 x 5 mm screws
• Eight M3 x 3 mm screws
• Two Brackets
• One printed copy of
Quick Start Guide
(this
document)
• One printed copy of
Safety Notes Summary
• Any other optional items that you ordered
Attach the standoffs
1. Attach the standoffs to the appro-
priate slots in the HDD.
1
2
3
4
1. Attach the tape to the HDD.
Assemble the SATA
mounting plate
1. Assemble the SATA mounting plate.
The assembly should be as shown
below:
5
