COMX-CAR-210
Quick Start Guide
P/N:6806800L15B (August 2014)
Observe ESD-safe
Measures
What’s in the Box?
Installation of the Heat
Spreader/Heat Sink
When installing or servicing the
module or accessories, strictly
observe the safety precautions
in the
Safety Notes Summary
.
Otherwise, personal injury or
property damage may occur.
• Use either a properly grounded ESD
wrist strap or make sure that you are
working in an ESD-safe environ-
ment.
• Connect to the ESD connector at the
front or the rear of the system.
Make sure you receive all items of
your shipment:
• One COMX-CAR-210
• One printed copy of
Quick Start
Guide
(this document)
• One printed copy of
Safety Notes
Summary
• Any other optional items that
you ordered
Prepare the Installation
Site
• For information on the environmen-
tal and power requirements, see the
COMX-CAR-210 Installation and Use
manual.
• Operating temperatures refer to the
temperature of the air circulating
around the blade and not to the
actual component temperature.
1
2
3
4
1. Check the thermal interface mate-
rial pads on the heat spreader/heat
sink. Make sure the pads are aligned
to their corresponding components
on the COM Express module.
2. Align the standoffs of the heat
spreader/heat sink with the screw
holes on the COM Express module.
3. Hold the heat spreader/heat sink
and the COM Express module
together, and then turn them over.
4. Attach the heat spreader/heat sink
to the COM Express module by using
the standoffs (male/female type).
