Artesyn AXP1440, Инструкция по установке и эксплуатации, Страница: 66 / 156

AXP1440 Shelf Description
64 AXP1440 Installation and Use (6806800H23T )

FTM distribution board, provides the signal and power connections to the upper fan
tray modules from the backplane

Alarm Display Panel (ADP), contains the shelf FRU SEEPROMs, telco alarm indicators,
and serial console ports for the SAM. The following table shows the ADP telco alarm
indicators:
2.11 Standard Compliances
The AXP1440 AdvancedTCA platform complies with the safety and regulatory standards as
shipped from the factory. It is possible to use this product with other components that produce
a system not in compliance with system guidelines. Since Artesyn cannot anticipate what
equipment may be used with this enclosure or how it may be used, the responsibility for
designing a system that conforms overall to the safety requirements, EMI/RFI emission limits,
and other applicable standards rests entirely with the system integrator and installer.
Table 2-9. ADP LED Status Indicators
Alarm Display Panel LED LED Color State State/Condition
Critical alarm (CRT) Red On Active
Major alarm (MAJ) Red On Active
Minor Alarm (MIN) Yellow On Active
Power (PWR) Green On Power Present
Table 2-10. Standard Compliances
Standard Description
PICMG3.0 R1.0
PICMC1.5.1
Defines mechanics, board dimensions, power distribution, power
and data connectors, and system management.
UL 60950-1, EN 60950-1
IEC 60950-1
CAN/CSA C22.2 No 60950-1
Safety Requirements (legal)