ATCA-7365
Quick Start Guide
P/N:6806800K66C (May 2014)
Observe ESD-safe
measures
What’s in the box?
Install the DIMM
When installing or servicing the
module or accessories, strictly
observe the safety precautions
in the Safety Notes. Otherwise,
personal injury or property dam-
age may occur.
• Use either a properly grounded ESD
wrist strap or make sure that you are
working in an ESD-safe environ-
ment.
• Connect to the ESD connector at the
front or the rear of the system.
Make sure you receive all items of
your shipment:
• One ATCA-7365 blade
• Printed Quick Start Guide
• Printed Safety Notes Summary
• Any optional items ordered
Prepare the installation
site
• For information on the environmen-
tal and power requirements, see the
ATCA-7365 Installation and Use
man-
ual.
• Operating temperatures refer to the
temperature of the air circulating
around the blade and not to the
actual component temperature.
1
2
3
4
Notes:
• Some blade variants come with the
DIMM already installed.
• When installing DIMM memory
modules, the DIMM sockets farthest
on each memory channel from the
CPU device must be populated first.
• For thermal safety concerns, no 4-
rank DIMMs and no dual-die DIMMs
are allowed.
1. If necessary, remove the blade from
the system.
2. Open the locks of the memory mod-
ule socket.
3. Press the memory module carefully
into the socket. As soon as the mem-
ory module is fully inserted, the
locks automatically close.
4. If necessary, repeat steps 2–3 to
install additional memory modules.
