Artesyn Embedded Technology SharpStreamer PCIE-7207, Инструкция по установке и эксплуатации

Страница: 33 / 118

Hardware Preparation and Installation
SharpStreamer™ PCIE-7207 Installation and Use (6806800T60F)
33
The following table provides the environmental and thermal requirements for the PCIE-7207
card.
2.2.2 Power Requirements
Before installing the card, make sure that the system is capable of delivering the required
power. The following table provides the typical power consumed by the PCIE-7207card.
Card Damage
High humidity and condensation on the card surface causes short circuits.
Do not operate the card outside the specified environmental limits. Make sure that the
card is completely dry and there is no moisture on its surface before applying power.
Table 2-1 Environmental and Thermal Requirements
Requirement Operating Non-Operating
Temperature 0°C to 50°C -40°C to 70°C
Minimum Airflow
(Reference to sea level)
500 LFM (2.5 m/sec)
400 LFM (2 m/sec) for 35°C
Operation
-
Temperature Change 30°C/hr 30°C/hr
Relative Humidity 5% to 85% Non-Condensing 5% to 90% Non-Condensing but not to
exceed 0.024 kg of water per kg of dry
air
Shock and Vibration 0.01G’s 5 to 200Hz EN 300 019-2-2 Class 2.3
Altitude Up to 1800m
With 40°C operation between
1800m and 4000m Up to 12000m
Table 2-2 Power Requirements
Mode PCIe slot power ATX 2x3 power
Idle 6W (+/- 10%) 8W (+/- 10%)