Artesyn Embedded Technology 6806800U78A Скачать руководство пользователя страница 21 | Manualshive

Страница: 21 / 94

background image

SharpStreamer™ Pro Mini PCIE-7210-1 Installation and Use (6806800U78A)

21

Sicherheitshinweise

Dieses Kapitel enthält Hinweise, die potentiell gefährlichen Prozeduren innerhalb dieses
Handbuchs vorrangestellt sind. Beachten Sie unbedingt in allen Phasen des Betriebs, der
Wartung und der Reparatur des Systems die Anweisungen, die diesen Hinweisen enthalten
sind. Sie sollten außerdem alle anderen Vorsichtsmaßnahmen treffen, die für den Betrieb des
Produktes innerhalb Ihrer Betriebsumgebung notwendig sind. Wenn Sie diese
Vorsichtsmaßnahmen oder Sicherheitshinweise, die an anderer Stelle diese Handbuchs
enthalten sind, nicht beachten, kann das Verletzungen oder Schäden am Produkt zur Folge
haben.

Artesyn Embedded Technologies ist darauf bedacht, alle notwendigen Informationen zum
Einbau und zum Umgang mit dem Produkt in diesem Handbuch bereit zu stellen. Da es sich
jedoch um ein komplexes Produkt mit vielfältigen Einsatzmöglichkeiten handelt, können wir
die Vollständigkeit der im Handbuch enthaltenen Informationen nicht garantieren. Falls Sie
weitere Informationen benötigen sollten, wenden Sie sich bitte an die für Sie zuständige
Geschäftsstelle von Artesyn.

Das System erfüllt die für die Industrie geforderten Sicherheitsvorschriften und darf
ausschließlich für Anwendungen in der Telekommunikationsindustrie und im Zusammenhang
mit Industriesteuerungen verwendet werden.

Einbau, Wartung und Betrieb dürfen nur von durch Artesyn ausgebildetem oder im Bereich
Elektronik oder Elektrotechnik qualifiziertem Personal durchgeführt werden. Die in diesem
Handbuch enthaltenen Informationen dienen ausschließlich dazu, das Wissen von
Fachpersonal zu ergänzen, können dieses jedoch nicht ersetzen.

Halten Sie sich von stromführenden Leitungen innerhalb des Produktes fern. Entfernen Sie auf
keinen Fall Abdeckungen am Produkt. Nur werksseitig zugelassenes Wartungspersonal oder
anderweitig qualifiziertes Wartungspersonal darf Abdeckungen entfernen, um Komponenten
zu ersetzen oder andere Anpassungen vorzunehmen.

Installieren Sie keine Ersatzteile oder führen Sie keine unerlaubten Veränderungen am Produkt
durch, sonst verfällt die Garantie. Wenden Sie sich für Wartung oder Reparatur bitte an die für
Sie zuständige Geschäftsstelle von Artesyn. So stellen Sie sicher, dass alle
sicherheitsrelevanten Aspekte beachtet werden.

«
...
19
20
21
22
23
...
»

Содержание 6806800U78A































































































Отзывы:

Нет отзывов

Похожие инструкции для 6806800U78A

Бренд: Dahua Страницы: 24

Бренд: Industrex Страницы: 51

iW-RainboW-G30D

Бренд: iWave Страницы: 89

Бренд: 3Com Страницы: 18

Бренд: Supermicro Страницы: 24

Бренд: T.A Страницы: 11

Oresund EFC102200

Бренд: Bridgeworks Страницы: 84

Бренд: Idis Страницы: 16

Бренд: ZIMO Страницы: 13

Бренд: ZiLOG Страницы: 317

Бренд: SriHome Страницы: 12

Бренд: Corsair Страницы: 10

Бренд: NetBurner Страницы: 30

CU8210-D001-0200

Бренд: Beckhoff Страницы: 25

WSIL-1204-GT2-SFP2

Бренд: WAVESYS Страницы: 21

Бренд: National Instruments Страницы: 37

Бренд: QSC Страницы: 4

Бренд: Cisco Страницы: 122

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды