manualshive.com logo in svg

Artesyn Embedded Technology 6806800U29D, Инструкция по установке и эксплуатации

Поделиться
Скачать
Artesyn Embedded Technology 6806800U29D Скачать руководство пользователя страница 41

 

Functional Description

SharpStreamer™ Pro PCIE-7210 Installation and Use ( 6806800U29D)

41

3.2

DDR4 2133 Memory

The PCIE-7210 card comes with four DDR4 SODIMM channels, two on each E3-1578L v5 
processor. Each DIMM is populated with 8GB of memory. That means, each processor has an 
16GB DDR4 memory (8GB on each channel) running at DDR4-2133 speed, resulting a total 
32GB of memory on each PCIE-7210 card.

3.3

Ethernet Controller

3.3.1

82599

The second Ethernet interface (Port8-Port15) of each processor are used to directly connect 
both processors on the PCIE-7210 through a 10 Gigabit Ethernet connection.

3.4

Power

A 12 V power supply is provided to the card through two PCIe Gold Finger edge connectors 
(Edge connector 1 and Edge connector 2). There is a voltage and current monitor circuit on the 
12V bus to PCH1. This can be used to measure the power consumed by card.

The edge connector 1 provides 3.3V supply to the CPLD and the edge connector 2 provides 
3.0V RTC power to the PCH1 and PCH2.

Each DDR4 SODIMM channel is expandable up to 16GB.

Содержание 6806800U29D

















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды