Artec MULTIEYE, Руководство пользователя

Страница: 37 / 204

Hardware 37
© 2008 artec technologies AG
4.8.2 Configuring Windows
All official updates of the operating system and the most recent drivers for the computer's hardware should be
installed prior to installing MULTIEYE-HYBRID. All storage media which are used by MULTIEYE-HYBRID for
recording video data must be properly partitioned and formatted (NTFS). When using a network storage, the
respective disk drives must be mapped.
If a sound card is installed in your PC but no loudspeakers are connected, the sound card should be de-activated
in the Windows Device Manager. Then MULTIEYE-HYBRID will sound all acoustic messages through the internal
PC-speaker.
For the operation of MULTIEYE-HYBRID, a graphics resolution of at least 1024 by 768 pixels is necessary.
The color depth of the graphic card should be set to 16-bit (HiColor) to avoid needlessly wasting CPU resources
with a 32-bit display.
If the computer is connected to the Internet, software can be installed (for example the freeware program “
PTBSync
") with whose help the clock of the computer can be periodically coordinated with atomic time.
Alternatively, a PC atomic clock could take over this function.
4.8.3 Automatic Windows login
So that MULTIEYE will automatically re-boot – for example if a PC reset is activated by the Watchdog or after a
power outage – automatic user login must be activated.
Automatic user login can be activated in the Windows user settings. In Windows XP, the "old" user
administration (start
è
run
è
“
control userpasswords2
") must be used in such a case.